router2# router2#sh ip route Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate default U - per-user static route, o - ODR Gateway of last resort is not set 10.0.0.0/24 is subnetted, 1 subnets C 10.10.1.0 is directly connected, Ethernet0/0 R 11.0.0.0/8 [120/1] via 108.10.10.2, 00:00:07, Serial2/0 108.0.0.0/16 is subnetted, 1 subnets C 108.10.0.0 is directly connected, Serial2/0 router2# router2# RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 IP: s=10.10.1.1 (local), d=255.255.255.255 (Ethernet0/0), len 24, sending broad/multicast UDP src=520, dst=520 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 IP: s=108.10.10.1 (local), d=255.255.255.255 (Serial2/0), len 70, sending broad/multicast UDP src=520, dst=520 IP: s=108.10.10.2 (Serial2/0), d=255.255.255.255, len 56, rcvd 2 UDP src=520, dst=520 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 IP: s=10.10.1.1 (local), d=255.255.255.255 (Ethernet0/0), len 24, sending broad/multicast UDP src=520, dst=520 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 IP: s=108.10.10.1 (local), d=255.255.255.255 (Serial2/0), len 70, sending broad/multicast UDP src=520, dst=520 IP: s=108.10.10.2 (Serial2/0), d=255.255.255.255, len 56, rcvd 2 UDP src=520, dst=520 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 IP: s=10.10.1.1 (local), d=255.255.255.255 (Ethernet0/0), len 24, sending broad/multicast UDP src=520, dst=520 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 IP: s=108.10.10.1 (local), d=255.255.255.255 (Serial2/0), len 70, sending broad/multicast UDP src=520, dst=520 IP: s=108.10.10.2 (Serial2/0), d=255.255.255.255, len 56, rcvd 2 UDP src=520, dst=520 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 IP: s=10.10.1.1 (local), d=255.255.255.255 (Ethernet0/0), len 24, sending broad/multicast UDP src=520, dst=520 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 IP: s=108.10.10.1 (local), d=255.255.255.255 (Serial2/0), len 70, sending broad/multicast UDP src=520, dst=520 IP: s=108.10.10.2 (Serial2/0), d=255.255.255.255, len 56, rcvd 2 UDP src=520, dst=520 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops router2# router2# router2# router2# router2# router2#no detu   RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 IP: s=10.10.1.1 (local), d=255.255.255.255 (Ethernet0/0), len 24, sending broad/multicast UDP src=520, dst=520 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 IP: s=108.10.10.1 (local), d=255.255.255.255 (Serial2/0), len 70, sending broad/multicast UDP src=520, dst=520bug all All possible debugging has been turned off router2# router2# router1# router1# router1# router1# router1# router1#con   conf Configuring from terminal, memory, or network [terminal]? Enter configuration commands, one per line. End with CNTL/Z. router1(config)# router1(config)# router1(config)#ip ad     in e0 router1(config-if)# router1(config-if)#ip add      no ip add router1(config-if)# router1(config-if)#ip add 10.10.2.1 255.255.255.0 router1(config-if)# router1(config-if)#route rrip % Ambiguous command: "route rrip" router1(config)# router1(config)#rip   route rip % Ambiguous command: "route rip" router1(config)# router1(config)#router rip router1(config-router)# router1(config-router)#network         no network 10.10    1.0.0.0 router1(config-router)# router1(config-router)#network1 0    10.0.0.0 router1(config-router)# router1(config-router)#end router1# router1#sh ip ro %SYS-5-CONFIG_I: Configured from console by consoleute Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate default U - per-user static route, o - ODR Gateway of last resort is not set 10.0.0.0/8 is variably subnetted, 2 subnets, 2 masks C 10.10.2.0/24 is directly connected, Ethernet0 R 10.0.0.0/8 [120/1] via 108.10.10.1, 00:00:35, Serial0 108.0.0.0/16 is subnetted, 1 subnets C 108.10.0.0 is directly connected, Serial0 router1# router1#sh    de  ping 10.10.1.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.10.1.1, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 28/29/32 ms router1#debug i ip rip RIP protocol debugging is on router1# router1# RIP: received v1 update from 108.10.10.1 on Serial0 10.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0 (10.10.2.1) network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial0 (108.10.10.2) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.1 on Serial0 10.0.0.0 in 1 hops router1# router1#conf Configuring from terminal, memory, or network [terminal]? Enter configuration commands, one per line. End with CNTL/Z. router1(config)# router1(config)# router1(config)# RIP: sending v1 update to 255.255.255.255 via Ethernet0 (10.10.2.1) network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial0 (108.10.10.2) network 10.0.0.0, metric 1service ? compress-config Compress the configuration file config TFTP load config files decimal-tty Interpret tty line numbers in decimal. exec-callback Enable exec callback exec-wait Delay EXEC startup on noisy lines finger Allow responses to finger requests hide-telnet-addresses Hide destination addresses in telnet command linenumber enable line number banner for each exec nagle Enable Nagle's congestion control algorithm old-slip-prompts Allow old scripts to operate with slip/ppp pad Enable PAD commands password-encryption Encrypt system passwords prompt Enable mode specific prompt pt-vty-logging Log significant VTY-Async events slave-log Enable log capability of slave IPs tcp-keepalives-in Generate keepalives on idle incoming network connections tcp-keepalives-out Generate keepalives on idle outgoing network connections tcp-small-servers Enable small TCP servers (e.g., ECHO) telnet-zeroidle Set TCP window 0 when connection is idle timestamps Timestamp debug/log messages --More--   router1(config)#service tip mesta ? debug Timestamp debug messages log Timestamp log messages router1(config)#service timesta debug router1(config)# router1(config)#end router1# router1# 00:17:47: RIP: received v1 update from 108.10.10.1 on Serial0 00:17:47: 10.0.0.0 in 1 hops %SYS-5-CONFIG_I: Configured from console by console router1# router1# 00:17:55: RIP: sending v1 update to 255.255.255.255 via Ethernet0 (10.10.2.1) 00:17:55: network 108.0.0.0, metric 1 00:17:55: RIP: sending v1 update to 255.255.255.255 via Serial0 (108.10.10.2) 00:17:55: network 10.0.0.0, metric 1 00:18:15: RIP: received v1 update from 108.10.10.1 on Serial0 00:18:15: 10.0.0.0 in 1 hops 00:18:15: 11.0.0.0 in 16 hops (inaccessible) 00:18:24: RIP: sending v1 update to 255.255.255.255 via Ethernet0 (10.10.2.1) 00:18:24: network 108.0.0.0, metric 1 00:18:24: RIP: sending v1 update to 255.255.255.255 via Serial0 (108.10.10.2) 00:18:24: network 10.0.0.0, metric 1 router1# router1# router1# router1# router2# router2# router2# router2#wr t Building configuration... Current configuration: ! version 11.2 no service udp-small-servers no service tcp-small-servers ! hostname router2 ! ! ! interface BRI0/0 no ip address shutdown ! interface Ethernet0/0 ip address 10.10.1.1 255.255.255.0 ! interface TokenRing0/0 no ip address shutdown ring-speed 16 ! --More--   router2# router2# router2# router2# router2#wr t Building configuration... Current configuration: ! version 11.2 no service udp-small-servers no service tcp-small-servers ! hostname router2 ! ! ! interface BRI0/0 no ip address shutdown ! interface Ethernet0/0 ip address 10.10.1.1 255.255.255.0 ! interface TokenRing0/0 no ip address shutdown ring-speed 16 ! --More--   router2# wr t Building configuration... Current configuration: ! version 11.2 no service udp-small-servers no service tcp-small-servers ! hostname router2 ! ! ! interface BRI0/0 no ip address shutdown ! interface Ethernet0/0 ip address 10.10.1.1 255.255.255.0 ! interface TokenRing0/0 no ip address shutdown ring-speed 16 ! --More--   router2# %ALIGN-3-SPURIOUS: Spurious memory access made at 0x6013D714 reading 0x0 router2# router2# router2# router2# router2# router2# router2# router2#wr m Building configuration... [OK] router2# router2#reload Proceed with reload? [confirm] %SYS-5-RELOAD: Reload requested System Bootstrap, Version 11.1(19)AA, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1) Copyright (c) 1998 by cisco Systems, Inc. C3600 processor with 32768 Kbytes of main memory Main memory is configured to 64 bit mode with parity disabled program load complete, entry point: 0x80008000, size: 0x3ae720 Self decompressing the image : ############################################################################################################################################################################################################################################################################################################################### [OK] Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706 Cisco Internetwork Operating System Software IOS (tm) 3600 Software (C3640-J-M), Version 11.2(4)XA, PLATFORM SPECIFIC, RELEASE SOFTWARE (fc1) Copyright (c) 1986-1997 by cisco Systems, Inc. Compiled Mon 24-Feb-97 16:26 by tamb Image text-base: 0x600088A0, data-base: 0x6073A000 cisco 3640 (R4700) processor (revision 0x00) with 24576K/8192K bytes of memory. Processor board ID 07017261 R4700 processor, Implementation 33, Revision 1.0 Bridging software. SuperLAT software copyright 1990 by Meridian Technology Corp). X.25 software, Version 2.0, NET2, BFE and GOSIP compliant. TN3270 Emulation software (copyright 1994 by TGV Inc). Basic Rate ISDN software, Version 1.0. 1 Ethernet/IEEE 802.3 interface(s) 1 Token Ring/IEEE 802.5 interface(s) 4 Low-speed serial(sync/async) network interface(s) 1 ISDN Basic Rate interface(s) DRAM configuration is 64 bits wide with parity disabled. 125K bytes of non-volatile configuration memory. 8192K bytes of processor board System flash (Read/Write)  Press RETURN to get started! %PA-2-UNDEFPA: Undefined Port Adaptor type 0 in bay 1 %PA-2-UNDEFPA: Undefined Port Adaptor type 68 in bay 3 %LINK-5-CHANGED: Interface BRI0/0, changed state to administratively down %SYS-5-CONFIG_I: Configured from memory by console %SYS-5-RESTART: System restarted -- Cisco Internetwork Operating System Software IOS (tm) 3600 Software (C3640-J-M), Version 11.2(4)XA, PLATFORM SPECIFIC, RELEASE SOFTWARE (fc1) Copyright (c) 1986-1997 by cisco Systems, Inc. Compiled Mon 24-Feb-97 16:26 by tamb %LINK-3-UPDOWN: Interface Ethernet0/0, changed state to up %LINK-3-UPDOWN: Interface Serial2/0, changed state to up %LINK-5-CHANGED: Interface Serial2/1, changed state to administratively down %LINK-5-CHANGED: Interface Serial2/2, changed state to administratively down %LINK-5-CHANGED: Interface Serial2/3, changed state to administratively down %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0/0, changed state to down %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/0, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface TokenRing0/0, changed state to down %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0/0:1, changed state to down %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0/0:2, changed state to down %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/0, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/1, changed state to down %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/2, changed state to down %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/3, changed state to down %LINK-5-CHANGED: Interface TokenRing0/0, changed state to administratively down router2> router2> router2> router2> router2> router2> router2> router2>en router2# router2#wr t Building configuration... Current configuration: ! version 11.2 no service udp-small-servers no service tcp-small-servers ! hostname router2 ! ! ! interface BRI0/0 no ip address shutdown ! interface Ethernet0/0 ip address 10.10.1.1 255.255.255.0 ! interface TokenRing0/0 no ip address shutdown ring-speed 16 ! --More--   router2# router2# router2# router2# router2# router2# router2# router2# router2#sh ver Cisco Internetwork Operating System Software IOS (tm) 3600 Software (C3640-J-M), Version 11.2(4)XA, PLATFORM SPECIFIC, RELEASE SOFTWARE (fc1) Copyright (c) 1986-1997 by cisco Systems, Inc. Compiled Mon 24-Feb-97 16:26 by tamb Image text-base: 0x600088A0, data-base: 0x6073A000 ROM: System Bootstrap, Version 11.1(19)AA, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1) router2 uptime is 0 minutes System restarted by reload System image file is "flash:c3640-j-mz.112-4.XA", booted via flash cisco 3640 (R4700) processor (revision 0x00) with 24576K/8192K bytes of memory. Processor board ID 07017261 R4700 processor, Implementation 33, Revision 1.0 Bridging software. SuperLAT software copyright 1990 by Meridian Technology Corp). X.25 software, Version 2.0, NET2, BFE and GOSIP compliant. TN3270 Emulation software (copyright 1994 by TGV Inc). Basic Rate ISDN software, Version 1.0. 1 Ethernet/IEEE 802.3 interface(s) 1 Token Ring/IEEE 802.5 interface(s) 4 Low-speed serial(sync/async) network interface(s) --More--   router2# router2# router2# router2# router2# router2# router2#conf Configuring from terminal, memory, or network [terminal]? Enter configuratio n commands, one per line. End with CNTL/Z. router2(config)# router2(config)# router2(config)#no route rrip     r rip router2(config)# router2(config)#end router2# router2#sh ip route Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate default U - per-user static route, o - ODR Gateway of last resort is not set 10.0.0.0/24 is subnetted, 1 subnets C 10.10.1.0 i %SYS-5-CONFIG_I: Configured from console by consoles directly connected, Ethernet0/0 108.0.0.0/16 is subnetted, 1 subnets C 108.10.0.0 is directly connected, Serial2/0 router2# router2# router2# router2# router2# router2# router2# router2#sh ip route Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate default U - per-user static route, o - ODR Gateway of last resort is not set 10.0.0.0/24 is subnetted, 1 subnets C 10.10.1.0 is directly connected, Ethernet0/0 108.0.0.0/16 is subnetted, 1 subnets C 108.10.0.0 is directly connected, Serial2/0 router2# router2#ocnf Translating "ocnf"...domain server (255.255.255.255) % Name lookup aborted router2# router2# router2# router2# router2# router2# router2# router2# router2# router2# router2# router2# router2# router2# router2#conf Configuring from terminal, memory, or network [terminal]? Enter configuration commands, one p er line. End with CNTL/Z. router2(config)# router2(config)# router2(config)#route r   r er rip router2(config-router)# router2(config-router)#network 10.10.   0.0.0 router2(config-router)# router2(config-router)#network 108.10.0.0 router2(config-router)# router2(config-router)#end router2# router2#sh ip route Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate default U - per-user static route, o - ODR Gateway of last resort is not set 10.0.0.0/24 is subnetted, 1 subnets C 10.10.1.0 i %SYS-5-CONFIG_I: Configured from console by cos directly connected, Ethernet0/0 108.0.0.0/16 is subnetted, 1 subnets C 108.10.0.0 is directly connected, Serial2/0 router2# router2#nsole router2# router2# router2# router2# router2# router2#sh ip route Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate default U - per-user static route, o - ODR Gateway of last resort is not set 10.0.0.0/24 is subnetted, 1 subnets C 10.10.1.0 is directly connected, Ethernet0/0 108.0.0.0/16 is subnetted, 1 subnets C 108.10.0.0 is directly connected, Serial2/0 router2# router2#pin g  g 10.10.2.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.10.2.1, timeout is 2 seconds: ..... Success rate is 0 percent (0/5) router2# router2# router2# router2# router2#ping 10.10.2.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.10.2.1, timeout is 2 seconds: ..... Success rate is 0 percent (0/5) router2#conf Configuring from terminal, memory, or network [termina l]? Enter configuration commands, one per line. End with CNTL/Z. router2(config)# router2(config)# router2(config)#router      end router2# router2# router2# router2# router2# router2# router2# router2# %SYS-5-CONFIG_I: Configured from console by consoledebutg         router2# router2# router2# router2# router2# router2#db de  ebug ip rip RIP protocol debugging is on router2# router2# RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 10.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 router2# router2# router2# router2# router2# router2#pi RIP: received v1 update from 108.10.10.2 on Serial2/0 10.0.0.0 in 1 hopsng 10.10.2.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.10.2.1, timeout is 2 seconds: ..... Success rate is 0 percent (0/5) router2# RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 router2# router2# router2# router2# router2# router2# router2# router2#sh ip route Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate default U - per-user static route, o - ODR Gateway of last resort is not set 10.0.0.0/24 is subnetted, 1 subnets C 10.10.1.0 is directly connected, Ethernet0/0 108.0.0.0/16 is subnetted, 1 subnets C 108.10.0.0 is directly connected, Serial2/0 router2# router2# RIP: received v1 update from 108.10.10.2 on Serial2/0 10.0.0.0 in 1 hops router2# router2# router2# router2# router2# router2# router2# router2#sh ip   n s0 2/0 Serial2/0 is up, line protocol is up Hardware is CD2430 in sync mode Internet address is 108.10.10.1/16 MTU 1500 bytes, BW 128 Kbit, DLY 20000 usec, rely 255/255, load 1/255 Encapsulation HDLC, loopback not set, keepalive set (10 sec) Last input 00:00:01, output 00:00:05, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0 (size/max/drops); Total output drops: 0 Queueing strategy: weighted fair Output queue: 0/64/0 (size/threshold/drops) Conversations 0/1 (active/max active) Reserved Conversations 0/0 (allocated/max allocated) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 33 packets input, 2042 bytes, 0 no buffer Received 66 broadcasts, 0 runts, 0 giants 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort 35 packets output, 2271 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 output buffer failures, 0 output buffers swapped out 0 carrier transitions DCD=up DSR=up DTR=up RTS=up CTS=up router2# router2# router2# router2# router2# router2# router2# router2#sh i p   RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1p rip ^ % Invalid input detected at '^' marker. router2# router2#sh ip route Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate default U - per-user static route, o - ODR Gateway of last resort is not set 10.0.0.0/24 is subnetted, 1 subnets C 10.10.1.0 is directly connected, Ethernet0/0 108.0.0.0/16 is subnetted, 1 subnets C 108.10.0.0 is directly connected, Serial2/0 router2# router2#conf Configuring from terminal, memory, or network [terminal]? Enter configuration commands, one per line. End with CN TL/Z. router2(config)# router2(config)# router2(config)#in s02  2/0 router2(config-if)# router2(config-if)#clock rate 64000 router2(config-if)# router2(config-if)# RIP: received v1 update from 108.10.10.2 on Serial2/0 10.0.0.0 in 1 hops router2(config-if)# router2(config-if)# router2(config-if)# router2(config-if)# router2(config-if)# router2(config-if)# router2(config-if)# router2(config-if)# router2(config-if)# router2(config-if)#end router2# router2# RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 %SYS-5-CONFIG_I: Configured from console by console router2# router2# router2# router2# router2# router2# router2# router2# 00:23:56: RIP: sending v1 update to 255.255.255.255 via Ethernet0 (10.10.2.1) 00:23:56: network 108.0.0.0, metric 1 00:23:56: RIP: sending v1 update to 255.255.255.255 via Serial0 (108.10.10.2) 00:23:56: network 10.0.0.0, metric 1 router1# router1# router1# router1# router1# router1# router1# router1#wr t Building configuration... Current configuration: ! version 11.2 service timestamps debug uptime no service password-encryption no service udp-small-servers no service tcp-small-servers ! hostname router1 ! ! ! interface Ethernet0 ip address 10.10.2.1 255.255.255.0 ! interface Serial0 ip address 108.10.10.2 255.255.0.0 no fair-queue ! interface Serial1 ip unnumbered Ethernet0 ! --More--   router1# router1# router1# router1# router1# router1# router1#conf Configuring from terminal, memory, or network [terminal]? Enter configuration commands, one pe r line. End with CNTL/Z. router1(config)# 00:24:08: RIP: received v1 update from 108.10.10.1 on Serial0 00:24:08: 10.0.0.0 in 1 hops router1(config)# router1(config)#in    router r        in e0 router1(config-if)# router1(config-if)#no ip add router1(config-if)# router1(config-if)#ip add 11.10.2.1 00:24:25: RIP: sending v1 update to 255.255.255.255 via Serial0 (108.10.10.2) - suppressing null update 244  55.255.255.0 router1(config-if)# router1(config-if)#router rip 00:24:34: RIP: received v1 update from 108.10.10.1 on Serial0 00:24:34: 10.0.0.0 in 1 hops 00:24:34: RIP: sending v1 update to 255.255.255.255 via Serial0 (108.10.10.2) - suppressing null update router1(config-router)# router1(config-router)#no netowrk      work 10.0.0.0 router1(config-router)# router1(config-router)#network1 0   1 1    11.0.0.0 router1(config-router)# router1(config-router)#end router1# router1#sh ip route Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate default U - per-user static route, o - ODR Gateway of last resort is not set R 10.0.0.0/8 [120/1] via 108.10.10.1, 00:00:15, Serial0 %SYS-5-CONFIG_I: Configured from console by console 11.0.0.0/24 is subnetted, 1 subnets C 11.10.2.0 is directly connected, Ethernet0 108.0.0.0/16 is subnetted, 1 subnets C 108.10.0.0 is directly connected, Serial0 router1# router1#sh ip route Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate default U - per-user static route, o - ODR Gateway of last resort is not set R 10.0.0.0/8 [120/1] via 108.10.10.1, 00:00:01, Serial0 00:24:52: RIP: sending v1 update to 255.255.255.255 via Ethernet0 (11.10.2.1) 00:24:52: network 10.0.0.0, metric 2 00:24:52: network 108.0.0.0, metric 1 00:24:52: RIP: sending v1 update to 255.255.255.255 via Serial0 (108.10.10.2) 00:24:52: network 11.0.0.0, metric 1 00:24:52: RIP: received v1 update from 108.10.10.1 on Serial0 00:24:52: 10.0.0.0 in 1 hops 11.0.0.0/24 is subnetted, 1 subnets C 11.10.2.0 is directly connected, Ethernet0 108.0.0.0/16 is subnetted, 1 subnets C 108.10.0.0 is directly connected, Serial0 router1# router1#sh ip routre ^ % Invalid input detected at '^' marker. router1# router1#sh ip route Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate default U - per-user static route, o - ODR Gateway of last resort is not set R 10.0.0.0/8 [120/1] via 108.10.10.1, 00:00:08, Serial0 11.0.0.0/24 is subnetted, 1 subnets C 11.10.2.0 is directly connected, Ethernet0 108.0.0.0/16 is subnetted, 1 subnets C 108.10.0.0 is directly connected, Serial0 router1# router1# 00:25:00: RIP: received v1 update from 108.10.10.1 on Serial0 00:25:00: 10.0.0.0 in 1 hops router1# router1# router1# router1# router1# router1#ping 10.10.1.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.10.1.1, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 28/29/32 ms router1# router2# router2# router2# router2# router2# router2# router2# router2#ping 11.10. RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops1.1   2.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 11.10.2.1, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 28/29/32 ms router2# RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 router2# router2# router2# router2# router2# router2# router2# router2# RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops router2 con0 is now available Press RETURN to get started. RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops router2> router2> router2> router2> router2> router2> router2> router2>en router2# router2#conf Configuring from terminal, memory, or network [terminal]? Enter configuratio n commands, one per line. End with CNTL/Z. router2(config)# router2(config)# router2(config)#rip t     in s2/0 router2(config-if)# router2(config-if)#ip  ip ? Interface IP configuration subcommands: access-group Specify access control for packets accounting Enable IP accounting on this interface address Set the IP address of an interface bandwidth-percent Set EIGRP bandwidth limit broadcast-address Set the broadcast address of an interface cgmp Enable/disable CGMP directed-broadcast Enable forwarding of directed broadcasts dvmrp DVMRP interface commands gdp Gateway Discovery Protocol hello-interval Configures IP-EIGRP hello interval helper-address Specify a destination address for UDP broadcasts hold-time Configures IP-EIGRP hold time igmp IGMP interface commands irdp ICMP Router Discovery Protocol mask-reply Enable sending ICMP Mask Reply messages mobile Mobile Host Protocol mroute-cache Enable fast-switching cache for incoming multicast packets mtu Set IP Maximum Transmission Unit multicast IP multicast interface commands multicast-threshold TTL threshold for multicast packets --More-- RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops  nhrp NHRP interface subcommands ospf OSPF interface commands pim PIM interface commands policy Enable policy routing probe Enable HP Probe support proxy-arp Enable proxy ARP rarp-server Enable RARP server for static arp entries redirects Enable sending ICMP Redirect messages rip Router Information Protocol route-cache Enable fast-switching cache for outgoing packets router IP router interface commands rsvp RSVP interface commands sdr Session Directory Protocol interface commands security DDN IP Security Option split-horizon Perform split horizon summary-address Perform address summarization tcp TCP header compression parameters unnumbered Enable IP processing without an explicit address unreachables Enable sending ICMP Unreachable messages router2(config-if)#ip % Incomplete command. router2(config-if)# router2(config-if)# router2(config-if)# router2(config-if)# router2(config-if)# router2(config-if)# router2(config-if)# router2(config-if)#wr t ^ % Invalid input detected at '^' marker. router2(config-if)# router2(config-if)#? Interface configuration commands: access-expression Build a bridge boolean access expression apollo Apollo interface subcommands appletalk Appletalk interface subcommands arp Set arp type (arpa, probe, snap) or timeout autodetect Autodetect Encapsulations on Serial interface backup Modify dial-backup parameters bandwidth Set bandwidth informational parameter bridge-group Transparent bridging interface parameters bsc BSC interface subcommands bstun BSTUN interface subcommands carrier-delay Specify delay for interface transitions cdp CDP interface subcommands clns CLNS interface subcommands clock Configure serial interface clock compress Set serial interface for compression custom-queue-list Assign a custom queue list to an interface dce-terminal-timing-enable Enable DCE terminal timing decnet Interface DECnet config commands default Set a command to its defaults delay Specify interface throughput delay description Interface specific description --More--   dialer Dial-on-demand routing (DDR) commands dialer-group Assign interface to dialer-list down-when-looped Force looped serial interface down dspu Down Stream PU dxi ATM-DXI configuration commands encapsulation Set encapsulation type for an interface exit Exit from interface configuration mode fair-queue Enable Fair Queuing on an Interface fras DLC Switch Interface Command full-duplex Configure full-duplex operational mode half-duplex Configure half-duplex and related commands help Description of the interactive help system hold-queue Set hold queue depth idle-character Set idle character type ignore-dcd ignore dcd ignore-hw ignore a serial signal invert-txc Invert transmit clock ip Interface Internet Protocol config commands ipx Novell/IPX interface subcommands isis IS-IS commands iso-igrp ISO-IGRP interface subcommands keepalive Enable keepalive lan-name LAN Name command --More-- RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1  lapb X.25 Level 2 parameters (Link Access Procedure, Balanced) lat LAT commands llc2 LLC2 Interface Subcommands load-interval Specify interval for load calculation for an interface locaddr-priority Assign a priority group loopback Configure internal loopback on an interface mac-address RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops Manually set interface MAC address mop DEC MOP server commands mtu Set the interface Maximum Transmission Unit (MTU) netbios Use a defined NETBIOS access list or enable name-caching no Negate a command or set its defaults nrzi-encoding Enable use of NRZI encoding ntp Configure NTP physical-layer Configure sync or async physical layer on serial interface ppp Point-to-point protocol priority-group Assign a priority group to an interface pulse-time Enables pulsing of DTR during resets random-detect Enable Random Early Detection (RED) on an Interface --More--   rx-sync-disable rx sync disable sap-priority Assign a priority group sdllc Configure SDLC to LLC2 translation serial serial interface commands shutdown Shutdown the selected interface smds Modify SMDS parameters smrp Simple Multicast Routing Protocol interface subcommands sna SNA pu configuration snapshot Configure snapshot support on the interface snmp Modify SNMP interface parameters stun STUN interface subcommands tarp TARP interface subcommands traffic-shape Enable Traffic Shaping on an Interface or Sub-Interface transmit-interface Assign a transmit interface to a receive-only interface transmitter-delay Set dead-time after transmitting a datagram tx-queue-limit Configure card level transmit queue limit vines VINES interface subcommands xns XNS interface subcommands router2(config-if)# RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops RIP: sending v1 update to 255.255.255.255 via Ethernet0/0 (10.10.1.1) network 11.0.0.0, metric 2 network 108.0.0.0, metric 1 RIP: sending v1 update to 255.255.255.255 via Serial2/0 (108.10.10.1) network 10.0.0.0, metric 1 RIP: received v1 update from 108.10.10.2 on Serial2/0 11.0.0.0 in 1 hops